9.53 - Brake Cleaner  

This product is ideal for brakes and brake pads. It cleans all the deposits of grease, oil, tar and silicone.

  9.54 - Carburettor Cleaner  

It reduces the fuel consumption and increases the efficiency of the engine. It improves the acceleration and stabilizes the idling speed.

  9.55 - Carpet Cleaner  

It deeply cleans any synthetic or natural fabrics. The active foam treats the fibres, absorbs the dirt and revives the colours. 
  9.56 - Silicone Spray  

It lubricates all moving plastic or metal parts. It protects rubber parts from drying up.
  9.57 - Anti Tar  

It removes any trace of tar, sludge, oil, grease, carburant and asphalt from the body-work, wheels and wheel rims.
  9.58 - Wheel Cleaner  

Formula without acids, it cleans and renews all type of wheels or rims in a few minutes.
  9.59 - Extra Grease  

Superior quality grease for the motoring sector in general. It is excellent for ball bearings, joints, chains, runners, etc. 
  9.60 - Polisher Extra  

It contains silicone. It renews, cleans, polishes and protects any vinyl surface, leather, plastic, rubber, etc. It is antistatic against dust. 
  9.61 - Tire Saver  

It allows a quick intervention in case of a puncture. It works on pneumatics of any sort of vehicles.
  9.62 - Easy Start  

It facilitates the start of the engine from cold, especially ideal for diesel engines. It is excellent for the winter season.

 Other Automotive Products

SAFE K 805 - Degreasing Detergent of Natural Origin  

SAFE K805 is used to degrease: motors, carburetors, metal and non-metal elements; it can be applied either with  a spray gun or with a brush, in dipping or shaking tanks. During application no particular precautions such as masks or room airing are needed, since its solvent mixture is of natural origin it does not release any vapours.

 

With SAFE K805 the degreasing process is very quick, thanks to surfactants which facilitate dirt removal from any surface. SAFE K 805 can be used safely on any type of metal, painted surface, plastic, rubber, aluminium parts, etc.

 

SHAKING TANKS

The anti-foam properties of SAFE K805 allow for trouble-free application of the product and for workpiece degreasing in shaking tanks.

 

FEATURES

Not-harmful as per D.M. 17.10.84

Non-toxic

Excellent degreasing and solvent power

Non-irritant

Citrus fruit smell

Anti-foam properties

Not subject to UTIF

SAFE K805 does not contain any chlorine, nitrogen, phosphorus or aromatic solvents.

 

 

SHAMPOO AUTO - Highly Concentrated Liquid Detergent

 

SHAMPOO AUTO is an highly concentrated neutral liquid detergent for washing car coachworks.

Particularly suitable where bulk washing of many vehicles is required thanks to its excellent performance and low cost. The neutral pH of SHAMPOO AUTO guarantees the best care of coachwork natural colours and does not jeopardize any material (metallic or not) present on car coachwork. The high degreasing power of SHAMPOO AUTO allows for perfect cleaning and polishing of the car even if just a light mechanical action is exercised (necessary in order to get the best result).

 

CONCENTRATED. Owing to its special formulation, the product can be used diluted with water to ensure the best results. NEUTRAL. It does not contain any substance which can attack the colours of car coachwork. ECONOMIC: Its low purchasing cost is reduced even further thanks to the extensive dilution allowed. 

 

 

SWAMM - Multipurpose Cleanser

 

SWAMM is an aerosol multipurpose cleanser, developed for those customers requiring a “ready to use” product. SWAMM removes the inconvenience of those customers claiming that because their workers use concentrated liquid cleanser in a excessive way the products usually are far from economical.

 

SWAMM is a water based detergent, with cleaning power that can be classified as middling; the light foamy deposits penetrate into the dirt and soften it. Then you just have to remove everything with a clean cloth or with a paper cloth type ROTOL CART or MIDI ROLL of FAREN Industrie Chimiche S.p.A.

 

APPLICATIONS

 

INDUSTRY: excellent alternative to TENSOPOL 10 for cleaning dirty machineries such as: food equipment – sewing machines – office furniture – computers and screens etc.

COACHWORK: for internal car cleaning, excellent for glass and crystal.

COMMUNITIES AND PUBLIC SERVICES

SCHOOLS: for cleaning glasses, desks, chairs etc.

HOSPITALS: for cleaning glasses – plastic and metal laminate furniture

PUBS: for cleaning coffee machines – tables – glass – billiard pockets  and balls.

BUTCHERS AND GROCERS: for cleaning cutting machines – work surfaces – glass – etc.

 

 
THOR 91 - Multi-Purpose Highly Concentrated Detergent  

Following the requests of our customers and with the attention that FAREN always pays to the requirements of its customers, we have formulated a new product called THOR 91, which gathers the best of nowadays raw parts technology.

In fact all detergent substances such as: anionic, non-ionic surfactants, sequestering, inhibiting, wetting agents, dioxydrilic solvents, alcali, are included in this product in high concentration and allow to use it with very high dilutions.

 

The product is a liquid with good viscosity completely homogeneous and easly water soluble. THOR 91 has no paint stripping or opacifying effect if used in the recommended concentrations.

 

 
Black Road - Tyres Renewing Cleaner  

BLACK ROAD thanks to its natural composition and to the contained resins gives to tires a renewing dark black effect. BLACK ROAD protection avoids felting due to the sun and extends the effect “clean tires”.

 

INSTRUCTIONS FOR USE AND DILUTIONS:

dilute one part of BLACK ROAD with 3/5 parts of water and with brush or sprayer apply the solution on the tires previously washed. Wait for drying. Repeat the operation after any washing.

 

 

Artic Flu - Antifreeze Liquids for Radiators

 

ARTIC FLU line is composed of protective anti-freeze liquids for radiators based on a new formulation, for motor vehicle cooling circuits of all brands. Its formulation is environmental friendly since it does not contain any amines, nitrites or phosphates.

 

QUALITY STANDARDS - SPECIFICATIONS AND APPROVALS

The innovative formula is based on non conventional and non toxic additives, ensuring efficient protection of all parts, including the currently widely used alloy cylinder heads.

The product complies with the following standards:

SAE J 1034 - BS 6580 - CUNA NC 956 - 16.

It passes and/or meets most requirements of the major  vehicle manufacturers such as:

MERCEDES BENZ-FIAT-IVECO-PEUGEOT-GENERAL MOTORS-FORD-ROVER-DAF.

 

 

PROPERTIES AND ADVANTAGES

Anti-freeze protection level according to the ARTIC FLU type and concentration in water.

Total compatibility with rubber and seals.

Does not cause brittleness and swelling of the rubber hoses and reduce the risk of  leakages.

Good resistance to foaming.

Prevention of overheating.

Excellent rust and scale-preventing properties thus improving the heat exchange.

 

 

POL CAR - Universal Brightening and Renewing Cleaner

 

POL CAR is excellent for: LIQUID CLEANER FOR COCKPITS, BRIGHTNER FOR INTERNAL PARTS, DETERGENT FOR GLASSES, BRIGHTNER FOR COACHWORK.

 

PRACTICAL

POL CAR is always ready for use and if applied with the suitable sprayers is as practical as a spray product.

 

ECONOMIC

POL CAR can be diluted in water, therefore is cheaper than any other similar aerosol product on the market.

 

SAFE

POL CAR contains no gas or propellants, therefore is fully non-toxic.

 

 

Brake Fluid - DOT 3

 

Synthetic fluid (glycol ether and polyglycol based), it contains high performing corrosion inhibitors suitable to prevent corrosion to metal components, and anti-oxidant additives, in order to avoid the development of acid deposits and of other decomposition products. It is specifically formulated to be used in the hydraulic systems of vehicles brakes and clutches.

-  Boiling point suitable to guarantee the safe running of braking systems..

-  Safe behaviour against “vapour lock” development caused by higher working temperatures.

-  Excellent stability to low temperatures

-  Good behaviour viscosity/temperature: it keeps viscosity in a wide interval of working temperatures.

-  Excellent protection of ferrous and non-ferrous metals.

-  Total compatibility with elastomers present in the braking devices.

-  Good lubrication  of mobile parts in the braking systems.

-  High thermal stability during the whole working operation.

-  DOT3 complies with SAE J 1703, ISO 4925, CUNA NC 956-01 specifications and USA Safety Rules FMVSS 116 DOT3.

 

APPLICATIONS

DOT3 is absolutely suitable to be used in any type of braking system (disk, drum and clutches) of cars, motor-cars, tractors, earthmoving equipments. It can be mixed with all good-quality brake fluids at synthetic base. It is recommended to comply with the advices of vehicle manufacturers as regards intervals for changing  the fluid in the braking device.

 

 

EVEROL BRAKE - High Performance Synthetic Fluid For Braking Systems- Boiling Point 280°C  -  ABS Recommended - DOT 4

 

EVEROL BRAKE is a synthetic brake fluid with a very high boiling point.

 

Very high boiling point in "wet" and "dry" running, exceeding even the limits of DOT 5 specification.

Exceptional  "anti-vapour lock" properties and consequent resistance to formation of vapour bubbles as a result of overheating or humidification of the fluid. Compatible with all metallic, rubber and synthetic materials of the braking system. Does not cause harmful swelling of the elastomeric seals.

Compatible and mixable with fluids of the same category. Long-term stability of its characteristics.

 

 

APPLICATIONS

EVEROL BRAKE is specifically formulated for the most advanced disc braking systems of cars and motorcycles. Also, it is recommended for the sophisticated braking systems fitted on sports cars or standard cars equipped with anti-skid or anti-blocking systems (ABS). EVEROL BRAKE- DOT 4  is also suitable for drum braking systems.

 

 

EVEROL SYNT - Super-Multi-Degree Oil with Syntetic Base for Petrol and Diesel Turbotested Engines 15w/40

 

EVEROL SYNT is a modern super-multi-degree 15W40, studied for the most different requirements, with high performances even in case of long periods from one change to the other, suitable for the newest petrol motors and for turbo diesel engines too.

EVEROL SYNT is the suitable answer to the requirements of the most different commercial and industrial vehicles.

 

FEATURES AND ADVANTAGES:

Highest protection and easy cold start

Thanks to the level of detergency, it assures constant cleaning and lubrication of all engine internal components.

Avoids sludge forming in petrol engines even in the newest ones and assures the highest cleaning in diesel and turbo diesel engines.

Assures protection against:

Turbo-charging systems

Multivalve systems wearing

Allows the reduction of oil consumption

Compatibility and mixing with all engine oils having  mineral or synthetic base

Assures a protection against rust and a resistance to foam forming

 

APPLICATION FIELDS:

EVEROL SYNT is excellent for all engines of cars, commercial vehicles, vans (petrol, diesel or GPL). EVEROL SYNT is recommended for suction motors, turbo, multi-valve, 4-stroke motors (lead-free petrol) and cars with catalyst silencer.

It complies with the latest requirements of the most important car manufacturers, such as: ALFA ROMEO, AUDI, BMW, CITROEN, FERRARI, FIAT, FORD, GENERAL MOTORS, HONDA, INNOCENTI, LAMBORGHINI, LANCIA, MASERATI, MAZDA, MERCEDES BENZ, MITSUBISHI, NISSAN, OPEL, PEUGEOT, PORSCHE, RENAULT, ROLLS ROYCE, ROVER, SAAB, SEAT, TOYOTA, VOLKSWAGEN, VOLVO.

 

 

Everol Super V 20 W 50

 

Super multigrades oil for gasoline and diesel engines. The Super V Faren oils are - hight technology lubricants -  suitable for all the gasoline and diesel engines both atmosferics and turbocharged one, recomanded for all powers and makers.

 

The Faren Super V oils are also studied for the hight Rpm dieses atmosferic and turbo charged.

The 20W50 grade is the reccomended one for weather condition in our countries. The 20W50 is normally used when the special design of the engine demand a higher value of viscosity, in order to reduce the lubrican consumption.The 20W50 degree is particulary recomended on higth performance vehicoles - running at hight speeds and temperatures, for long times on the motorways.

 

Under the most severe  working conditions it ensures, due to his viscosity characteristics, the best performances, keeping at the wright pressure the lubricating circuits.